COTTON BUFF 100MM X 6MM SHAFT
0 out of 5
R146.90
Availability: 104 in stock SKU: TC801709 Categories: Abrasive/Grinding/Polish, Buffing Wheels, Polishing Tags: Brand TORK CRAFT, Buffing pad, Polishing
Or split into 4x interest-free payments Learn more
No interest, no fees,
4x instalments over 6 weeks
How it works
Payflex lets you get what you need now, but pay for it over four interest-free instalments. You pay 25% upfront, then three payments of 25% over the following six weeks.
1
Shop Online
and fill your cart
2
Choose Payflex at checkout
3
Get approved and
pay 25% today
with your debit
or credit card
4
Pay the remainder
over 6-weeks.
No interest.
No fees.
- You must be over
18 years old - You must have a valid
South African ID - You must have a debit or credit card
issued by Mastercard, Visa or Amex
Still want more information? Click here
- Description
- Additional information
Description
Buffing pad
Buffing
pad material:
Cotton
Diameter: Ø100mm
Bore: Ø6.0mm
Application:
The buffing pad is supplied with a chuck adaptor spindle.
It is ideal for buffing jewelry and other metals. The concentrically sewn
sections add strength to the buffing pad and it cleans surfaces without damaging
it.
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad. - It would be best to use a drill press to polish metals. If a drill press
is not accessible, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck. - The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occurring. - If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item. - Hold the metal lightly against the buffing pad. Allow the compound to do
the work. - If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
HEAVY DUTY CLEANING | REGULAR CLEANING | LIGHT POLISHING | HIGH GLOSS POLISHING | |
Hard metals | 1 | 2 | 5 | 6 |
Soft metals | 3 | 5 | 6 | |
Precious metals | 4 | 5 | 6 |
Additional information
Weight | 0.10000000 kg |
---|---|
Dimensions | 142.000000000 × 128.000000000 × 42.000000000 cm |